Geoflex Cleaning Agent

Failure to clean the surface is often the cause of premature bond failure.

It is vital to clean the rubber substrate before adhesive application. It is normal to find contaminants including chemical bloom, grease, dirt, etc. on the rubber surface.

Wipe the surface with a suitable solvent, such as Geoflex Cleaning Agent, to remove surface contaminants.

GeoFlex Contact -Adhesive

Geoflex Contact Adhesive has been specially developed and formulated to be used in conjunction with Geoflex sheeting, to achieve the best bonding results.

Care should be taken with regard to changing conditions of temperature and humidity. Please note that this information is specific to Geoflex bonding systems, should other manufacturers compounds be used then we recommend contact is made with our Technical Department.

GEOFLEX ASSOCIATED PRODUCTS

Geoflex is supported by a range of complementary products, designed to make its application economical and trouble free. Each of these products has been specially formulated to work specifically with Geoflex lining materials.

Geoflex Etch

To ensure the bond strength of the adhesive system, the rubber surface needs to be chlorinated in advance of the adhesive being applied. This can be achieved simply by brushing the rubber surfaces with Geoflex Etch. Geoflex Etch is premixed and ready to apply.

Information in this document and otherwise supplied to users is based on our general experiences and is given in good faith but, because of particular factors which are outside our knowledge and control and affect the use of products, no warranty is given or implied with respect to such information.

Specifications are subject to change without notice. A safe handling data sheet on this material is available as a PDF download. Click here to download

Please contact our Webmaster with questions or comments. © Copyright 2007 Tiflex Limited. All rights reserved.