Key Features & Benefits
- Industry standard resistance to wet and dry abrasion
- Elongation at break figure of 600% - among the best available
- Tensile strength 26MPa
- High tear strength of 25KN/m
- High resistance to ozone cracking - at least 5 times higher than most other available lining materials
- Good quality bond achievable on site with
- Tiflex adhesives
- Geoflex can be supplied pre-bonded to a variety of metal substrates.
Service
At Tiflex we have always been more than just a producer of materials. Over the years we have provided design input into many of the worlds most prestigious projects, going on to supply a product which met the specific needs of the project and, in the process, challenged the boundaries of rubber technology.
All our quality assured products are supported by a full technical service.
TYPICAL GEOFLEX APPLICATIONS
- Rubber to metal bonding
- Target backing linings
- Road sweeper seals and curtains
- Fabricated parts and seals
- Marine lock gates
- Marine dredgers and barges
- Veterinary operating and recovery rooms
- Tank linings and silo linings
|
Thickness (mm) |
Size (m) |
Re-Order Number |
|
1.5 |
1.3 x 10 |
GEO-G-1.5 |
|
3 |
1.3 x 10 |
GEO-G-3 |
|
6 |
1.3 x 10 |
GEO-G-6 |
|
8 |
1.3 x 10 |
GEO-G-8 |
|
10 |
1.3 x 10 |
GEO-G-10 |
|
12 |
1.3 x 10 |
GEO-G-12 |
|
20 |
1.3 x 10 |
GEO-G-20 |
|
25 |
1.3 x 10 |
GEO-G-25 |
|
Properties |
Unit |
Result |
|
Colour |
|
Grey |
|
Hardness |
IRHD |
40 ±5° IRHD |
|
Modulus 300 |
MPa |
3.5 |
|
Tensile Strength |
MPa |
25 |
|
Elongation at Break |
% |
600 |
|
Specific Gravity |
|
0.97 |
|
Wet ARI* |
% |
900 (9x improved over 80 IRHD EPDM) |
|
Thickness |
|
Class ST3 BS 3734 |
|
Width |
mm |
1300 Min (Class SW1 BS 3734) |
|
Surface Finish |
|
Plate finish on the front, cloth impression on the back |
*80 IRHD EPDM sheet arbitrarily set at 100%
Typical Physical Properties
GEOFLEX - GREY
Geoflex Grey has all the characteristics of the original Geoflex Red, with the additional benefits of a heightened resistance to ozone. The main weaknesses of quarry lining materials is their tendency to crack when exposed to ozone. Recognising this, Tiflex have produced an alternative material which has heightened resistance to ozone.
Coloured Grey for easy identification, Geoflex Grey is a superior material to all those already available on the market.
Geoflex is supported by a range of complementary products, designed to make its application economical and trouble free.
Information in this document and otherwise supplied to users is based on our general experiences and is given in good faith but, because of particular factors which are outside our knowledge and control and affect the use of products, no warranty is given or implied with respect to such information.
Specifications are subject to change without notice. A safe handling data sheet on this material is available as a PDF download. Click here to download
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Please contact our Webmaster with questions or comments. © Copyright 2007 Tiflex Limited. All rights reserved.