S/CB Clamp Block
This highly successful product was introduced to offer a simple and effective method of clamping where it is necessary to anchor pipes firmly whilist at the same time allowing expansion and contraction due to temperature and pressure fluctuations.
Clamp blocks provide protection and uniform spacing of pipe lines. They absorb shock, noise and vibration caused by fluid velocity and turbulence in pipes, high air velocity ducts, drumming of duct wall etc. which would otherwise be transmitted through the clamp to the surrounding structure or building.
TICO clamp blocks are manufactured singly or in multiple pipe carrying sections as shown.
Example of a multiple pipe carrying clamp block, pipes can be of different diameters
Component parts of a typical multi-pipe clamp block
Multi-pipe fixings can be modular so extra pipe support can be added.
Typlical Single pipe clamp block unit.
Example of a single pipe carrying clamp block
Component parts of a typical clamp block
Standard Tico S/CB Clamp Blocks are shown below.
| JW Part Number | G | A | B | C | Depth | E | H | Y | U Bolt ø F |
| M92-16 | 16 | 33 | 21 | 42 | 25 | 3 | 25 | 52 | 10 |
| M92-25 | 25 | 38 | 30 | 60 | 25 | 3 | 25 | 70 | 10 |
| M92-30 | 30 | 40 | 30 | 60 | 25 | 6 | 25 | 70 | 10 |
| M92-38 | 38 | 44 | 38 | 76 | 25 | 6 | 25 | 86 | 10 |
| M92-45 | 45 | 61 | 38 | 76 | 50 | 6 | 38 | 86 | 10 |
| M92-57 | 57 | 67 | 45 | 90 | 50 | 9.5 | 38 | 102 | 12 |
| M92-76 | 76 | 76 | 57 | 114 | 50 | 9.5 | 38 | 126 | 12 |
| M92-89 | 89 | 83 | 70 | 140 | 50 | 9.5 | 38 | 152 | 12 |
| M92-108 | 108 | 104 | 85 | 170 | 75 | 9.5 | 50 | 182 | 12 |
| M92-159 | 159 | 130 | 110 | 220 | 75 | 12.5 | 50 | 236 | 16 |
| M92-219 | 219 | 160 | 162 | 324 | 75 | 12.5 | 50 | 344 | 20 |
Note. All dimensions are in mm.
S/NG/CB Clamp Block
S/NG/CB clamp blocks are identical to S/CB clamp blocks with the added benefit of a molybdenum disulphide impregnated nylon bush to provide a low friction bore for the accommodation of additional longitudinal movement. They are suitable for sea water and oily applications at a maximum working temperature of 100ºC. Typical examples are long pipe carrying runs subject to sudden temperature fluctuations and 'U' bolt hanger installations etc.
Please contact us if you require a size not specified in the standard range. We can manufacture bespoke clamps to suit specific applications.
More detailed information can be found in the brochure available as an instant pdf download from this site.
_____________________________________________________________
Information in this document and otherwise supplied to users is based on our general experiences and is given in good faith but, because of particular factors which are outside our knowledge and control and affect the use of products, no warranty is given or implied with respect to such information. Specifications are subject to change without notice. A safe handling data sheet on this material is available as a PDF download.
For more information on pricing please contact us.