GRADE OF TREADMASTER

Product

TM3

TM4

TM5

TM7

TM8

Naturale

Marine

COMMENTS

Contact S Adhesive

Solvent-based contact adhesive

Use only where there is no specific requirement for fire retardancy or in areas where there is excessive water.

Size: 1 litre & 5 litre containers

Coverage: Up to 5m2 per litre

(to be applied to both surfaces)

Marine Contact Adhesive

Solvent-based heat and water resistant contact adhesive

Specifically formulated for use in marine environments

Size: 1 litre

Coverage: 3.5 m2 per 1 litre

(to be applied to both surfaces)

No 15 Adhesive

2 Part epoxy adhesive

Especially to be used where there is a requirement for fire retardency and low toxicity or in areas where there is excessive water or exterior use.

Size: 5 Kg pack

Coverage: Up to 3.5 m2 per Kg

(to be applied to subfloor only)

Marine Epoxy Adhesive

2 part epoxy resin

Specifically formulated for use in marine environments

Size: 600g packs

Coverage: 1.1m2 per 600g pack

Treadmaster Stripper Concentrated water-based stripper

Use to remove all traces of old sealer prior to resealing

Size: 5 Kg and 500ml containers

Coverage: 1m2 per Kg

Treadmaster Sealer

Water-based acrylic sealer

To be used to seal the surface after floor has been laid

Size: 5Kg and 500ml containers

Treadmaster Maintainer Concentrated water-based cleaner

To be used to clean the material in isolated spots

Size: 5Kg and 500ml containers

Treadmaster Slip-Not a water-based textured acrylic sealer

Specifically designed to enhance the wet-skid resistance of Treadmaster

Coverage: 10m2 per litre

C&I Polish

Also suitable to be used with Treadmaster Naturale as a sealer

Size: 5 litre

Treadcote Water-based paint

Formulated to rejuvenate Treadmaster Marine. Available to suit blue, fawn, grey and white-sand materials.

Size: 1 litre container

Coverage: 7m2 per litre container